Inspections
Loading dock and dock leveler inspection checklist
A check of each dock door before the first truck: the approach and dock edge, bumpers, trailer restraint and wheel chocks, the dock leveler and its lip, the door and seal, and lighting, with a result that takes a door out of service until it is repaired.
- How often
- Daily before the first truck, and after any reported damage
- Who
- Dock supervisor or shift lead
- Time
- About 10 min
- Items
- 24
Download this checklist
Free, no sign-up
Have your own paper version? A photo of it is enough for Vardian AI to draft the form. Photo-to-form →
Before you use it
- A general checklist. It makes no claim about what any regulation requires. Leveler capacity, restraint operation and service intervals come from the equipment manufacturer and your site’s dock procedure; put those figures in before you use it.
- Check one door at a time and record the door number with every finding. The cases to catch before the first truck: a trailer that can move away from the dock, a leveler that does not hold its position or return to stored, and an open dock edge with nothing across it when no trailer is in place.
- A defect that makes a door unsafe takes it out of service until it is repaired, so the result records whether the door was closed and tagged. One record per door: scan the door’s tag, photograph each finding, and a defect becomes a work order with an owner.
Dock door
- 1Checkpoint scan
Scan the dock door tag
- 2Note
Door number and area
Approach and dock edge
- 3Pass / fail
Approach and apron clear of debris, ice, standing water and potholes
- 4Pass / fail
Dock edge marked with a visible warning stripe
- 5Pass / fail
Gate, barrier or chain across the opening when no trailer is at the door
- 6Pass / fail
Dock bumpers present and not torn, split or worn through
- 7Pass / fail
Dock and trailer lights working
Trailer restraint
- 8Pass / fail
Vehicle restraint engages and its inside and outside signal lights work
- 9Pass / fail
Wheel chocks at the door and in good condition
- 10Pass / fail
Trailer stand available for trailers left without a tractor
Dock leveler
- 11Pass / fail
Leveler raises, lowers and returns to the stored position as designed
- 12Pass / fail
Lip extends fully and rests on the trailer bed
- 13Pass / fail
Deck and lip free of cracks, broken welds and bent hinges
- 14Pass / fail
Toe guards or side guards in place and undamaged
- 15Pass / fail
No hydraulic oil leaks at the cylinder, hoses or power unit
- 16Reading· gauge mark or %
Hydraulic oil level on the reservoir gauge
Set the limits from the manufacturer’s manual and your normal operating range.
- 17Pass / fail
Controls labeled; emergency stop works
- 18Pass / fail
Capacity label present and legible
Door and seal
- 19Pass / fail
Overhead door opens and closes fully; springs, cables and tracks undamaged
- 20Pass / fail
Door seal or shelter intact
Result
- 21Photo
Photo of any problem
- 22Note
Location and description of any defect
- 23Choice
Result
Door fit for use · Repair work order raised · Door closed and tagged until repaired
- 24Signature
Checked by
Download this checklist
Free, no sign-up
Read more
Field types in this template
- Checkpoint scan
- Note
- Pass / fail
- Reading
- Photo
- Choice
- Signature
In Vardian, readings are checked against their limits as they are entered, and photos and signatures attach to the check itself.
From the sheet to the round
Build a template as a Vardian form, and each line becomes a checkpoint that knows its limit.
Animation: a paper checklist line, compressor discharge pressure with a blank for the reading in bar, becomes a Vardian checkpoint with a limit of 7.0 to 8.5 bar. Scanning the compressor's NFC tag verifies the checkpoint, a reading of 9.1 bar is flagged out of range, and a work order is created from it.
Run this checklist on the round
We'll set it up in Vardian with your checkpoints and limits during a demo.