Safety
Emergency lighting and exit sign inspection checklist
A test log for each zone’s emergency lights and exit signs: a visual check on normal power, a test with normal power cut, every unit lit for the test duration, and each failed fixture recorded by location and raised as a work order.
- How often
- Monthly, or as your fire code sets
- Who
- Facility technician or fire warden
- Time
- About 20 min
- Items
- 16
Download this checklist
Free, no sign-up
Have your own paper version? A photo of it is enough for Vardian AI to draft the form. Photo-to-form →
Before you use it
- A general checklist. It makes no claim about what any regulation or code requires. Test intervals and durations for emergency lighting come from the fire code that applies to your building, the authority having jurisdiction and the fixture manufacturer; put those figures in before you use it.
- Test one zone at a time and record each fixture by its number or location. Cut normal power with the unit’s test button or the circuit’s test switch, and check that every emergency light comes on and every exit sign stays lit for the whole test. A battery unit that fades partway through, a head aimed at the ceiling and a dark exit sign are the findings to catch.
- For the exit routes themselves (obstructions, doors and signage), use the exit route inspection checklist alongside this one. One record per zone: scan the zone’s tag, photograph each failed fixture, and every failure becomes a work order with an owner.
Zone
- 1Checkpoint scan
Scan the zone tag
- 2Note
Zone, floor or area tested
On normal power
- 3Pass / fail
Charging or ready indicator lit on every battery unit
- 4Pass / fail
Fixtures and lenses clean and undamaged; heads aimed along the path of travel
- 5Pass / fail
Exit signs in place, legible and lit
- 6Pass / fail
Nothing blocks the view of an exit sign or the light from a fixture
Test with normal power cut
- 7Choice
Test type
Monthly short test · Full-duration test · Retest after repair
- 8Reading· seconds or minutes
Test duration
Set the duration from your fire code and the fixture manufacturer’s instructions.
- 9Pass / fail
Every emergency light came on when normal power was cut
- 10Pass / fail
Every exit sign stayed lit on battery or emergency power
- 11Pass / fail
All units stayed lit and bright for the whole test
- 12Pass / fail
Normal power restored and charging indicators back on after the test
Result
- 13Note
Fixtures that failed, by number or location
- 14Photo
Photo of each failed fixture
- 15Choice
Result
All passed · Failures found, work order raised · Temporary lighting arranged until repaired
- 16Signature
Tested by
Download this checklist
Free, no sign-up
Read more
Field types in this template
- Checkpoint scan
- Note
- Pass / fail
- Choice
- Reading
- Photo
- Signature
In Vardian, readings are checked against their limits as they are entered, and photos and signatures attach to the check itself.
From the sheet to the round
Build a template as a Vardian form, and each line becomes a checkpoint that knows its limit.
Animation: a paper checklist line, compressor discharge pressure with a blank for the reading in bar, becomes a Vardian checkpoint with a limit of 7.0 to 8.5 bar. Scanning the compressor's NFC tag verifies the checkpoint, a reading of 9.1 bar is flagged out of range, and a work order is created from it.
Run this checklist on the round
We'll set it up in Vardian with your checkpoints and limits during a demo.